EasyManuals Logo

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #520 background imageLoading...
Page #520 background image
Configuration Parameters
517
Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Applications > Broadsoft XSI > Network Directory > Personal
Parameter
bw_phonebook.group_common_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the group common directory.
Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Applications > Broadsoft XSI > Network Directory > Group Common
Parameter
bw_phonebook.enterprise_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the enterprise directory.
Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Applications > Broadsoft XSI > Network Directory > Enterprise
Parameter
bw_phonebook.enterprise_common_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the enterprise common directory.
Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Applications > Broadsoft XSI > Network Directory > Enterprise Common
Parameter
bw_phonebook.enterprise_common_displayname <y0000000000xx>.cfg
Description
It configures the display name on the phone screen for the enterprise common directory.
Note: It works only if "bw.xsi.directory.enable" and "bw_phonebook.enterprise_common_enable" are
set to 1 (Enabled).
Permitted
Values
String within 99 characters
Default
EnterpriseCommon
Web UI
Applications > Broadsoft XSI > Network Directory > Enterprise Common
Parameter
bw_phonebook.custom <y0000000000xx>.cfg
Description
It enables or disables the custom directory feature.
Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals