Yealink SIP-T40G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
520
Default
GroupCommon
Web UI
Applications > Broadsoft XSI > Network Directory > Group Common
Parameter
bw.xsi.directory.alphabetized_by_lastname.enable <y0000000000xx>.cfg
Description
It configures the call ID (first name and last name) display method when the phone receives an incom-
ing call, places an outgoing call or is during an active call.
Permitted
Values
0-First name Last name
1-Last name, First name
Default
0
Supported
Devices
All phones except CP920
Parameter
bw.calllog_and_dir <y0000000000xx>.cfg
Description
It enables or disables the phone to directly enter the Network Calls screen when pressing the History
soft key on the idle screen.
Note: It works only if "bw.xsi.call_log.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled, the phone will enter Local Calls screen when pressing the History soft key.
1-Enabled
Default
0
Parameter
search_in_dialing.bw_directory.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically search entries from the BroadSoft directory, and dis-
play the results on the pre-dialing/dialing screen.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
search_in_dialing.bw_directory.priority <y0000000000xx>.cfg
Description
It configures the search priority of the BroadSoft directory.
Permitted
Values
Integer greater than or equal to 0
Default
5
Parameter
directory_setting.bw_directory.enable <y0000000000xx>.cfg
Description
It enables or disables the users to access the BroadSoft directory by pressing the Directory/Dir soft
key.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
directory_setting.bw_directory.priority <y0000000000xx>.cfg
Description
It configures the display priority of the BroadSoft directory.
Permitted
Values
Integer greater than or equal to 0
Default
6

Yealink SIP-T40G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	No
Security algorithms	AES, HTTPS, SSL/TLS
Networking standards	IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP, TFTP, HTTP, HTTPS
Voice codecs	G.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.6 W
Certification	CE, FCC, ISO 9001
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Volume control	Digital
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	54 mm