Yealink SIP-T40G Administrator's Guide

Configuration Parameters
525
Time interval ranges from 1 to 20 (in seconds).
For example :
account.1.acd.call_information = 806<1 > 1005<2 > 1234
The phone will dial out the call center number 806, wait for 1s, automatically enter the user ID 1005,
wait for 2s, automatically enter the password 1234 when you press the In/Out (LogIn/Out) soft key on
the phone.
Note: It works only if “account.X.sip_server_type” is set to 12 (Star2Star).
Permitted
Values
String
Default
Blank
Parameter
account.X.acd.refresh_url
[1]
<MAC>.cfg
Description
It configures the URL the phone sends when the ACD agent logs into/logs out of the ACD system, or
refreshes the status (you press the In/Out (LogIn/Out) or Refresh soft key on the phone).
Note: It works only if “account.X.sip_server_type” is set to 12 (Star2Star).
Permitted
Values
String
Default
Blank
Parameter
account.X.acd.away_url
[1]
<MAC>.cfg
Description
It configures the URL the phone sends when the ACD agent changes the status to away (you press
the Away soft key on the phone).
For example :
account.1.acd.away_url= http://portal-dev.star2star.com:8181/yealink/reason_code_respon-
se?reason_code=#REASONCODE&agent_extension=ext_843 85&agent_location= starbox_628&a-
gent_phone=94&customer_id=435s
#REASONCODE will be automatically replaced with the away code you entered when the URL is
sent to the server.
Note: It works only if “account.X.sip_server_type” is set to 12 (Star2Star) and “accoun-
t.X.acd.unavailable_reason_enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Parameter
account.X.acd.available_url
[1]
<MAC>.cfg
Description
It configures the URL the phone sends when the ACD agent changes the status to available (you
press the Avail soft key on the phone).
Note: It works only if “account.X.sip_server_type” is set to 12 (Star2Star).
Permitted
Values
String
Default
Blank
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.

Yealink SIP-T40G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	No
Security algorithms	AES, HTTPS, SSL/TLS
Networking standards	IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP, TFTP, HTTP, HTTPS
Voice codecs	G.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.6 W
Certification	CE, FCC, ISO 9001
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Volume control	Digital
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	54 mm