Yealink SIP-T42G User Manual

User Guide for the SIP-T42G IP Phone
122
All participants can place the conference call on hold.
To place the conference call on hold:
1. Press the Hold soft key during an active conference call.
Other participants can hear each other.
Note
To resume the held conference call:
1. Press the Resume soft key.
All participants can mute or unmute themselves. But only the organizer and presenters
can mute or unmute other conference participants.
To mute the conference participants by organizer or presenters:
1. Press More->Members.
2. Press or to select the desired participant.
3. Press the FarMute soft key.
The muted participant can hear other participants, but other participants cannot
hear the muted participant.
The mute icon is displayed at the right of the participant who is muted.
The phone will beep softly every 30 seconds to remind you that you still have a call on
hold.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm