Yealink SIP-T42G

User Guide for the SIP-T42G IP Phone
38
The date formats available:
Date Format
Example (2016-2-16)
WWW MMM DD
Tue Feb 16
DD-MMM-YY
16-Feb-16
YYYY-MM-DD
2016-02-16
DD/MM/YYYY
16/02/2016
MM/DD/YY
02/16/16
DD MMM YYYY
16 Feb 2016
WWW DD MMM
Tue 16 Feb
Time and date format is configurable via web user interface at the path Settings->Time
& Date.
The Advanced Settings option is only accessible to the administrator. The default
administrator password is “admin”. For security reasons, you should change the default
administrator password as soon as possible.
To change the administrator password via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin) ->Set
Password.
2. Enter the current password in the Current PWD field.
3. Enter the new password in the New PWD field.
4. Enter the new password again in the Confirm PWD field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Administrator password is configurable via web user interface at the path
Security->Password.
You can set the “#” key or “*” key to perform as a send key while dialing.