Yealink SIP-T42G User Manual

User Guide for the SIP-T42G IP Phone
66
- If you select Enabled:
When the location is not set, location notification depends on the configuration
on the Skype for Business Server.
- If you select Disabled:
When the location is not set, the LCD screen will not prompt the location
notification.
For more information, refer to Location Notification on page 66.
3. Click Confirm to accept the change.
Note
When E911 location tip feature is enabled and the location of the phone is not set, the
location notification displayed on the phone depends on the configuration on the Skype
for Business Server.
a) When the parameter Location Required is set to Yes on the Skype for Business
Server, the LCD screen is shown as below after login:
When the location is set, no matter whether E911 location tip is enabled or disabled, the
LCD screen will not prompt the location notification.
E911 location tip feature is configurable via web user interface only.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm