Yealink SIP-T42G User Manual

Overview
7
In addition to the phone user interface, you can also customize your phone via web user
interface. In order to access the web user interface, you need to know the IP address of
your new phone. To obtain the IP address, press on the phone. Enter the IP address
(e.g., http://192.168.0.10 or 192.168.0.10) in the address bar of the web browser on your
PC. The default administrator user name and password are both “admin”
(case-sensitive).
The main options you can use to customize the IP phone via phone user interface and/or
via web user interface are listed in the following table:
Options
Phone User Interface
Web User Interface
Status
√
√
--IP Address
--MAC
--Firmware
--Network
--Phone
--Location
--License
Basic Phone Settings
√
--Language
√
--Time & Date
√
--Administrator Password
√
--Key as Send
√
--Phone Lock
√
--BToE
√
--Account Lock
√
--Audio Settings
--Volume
√
×
--Ring Tones
√
√
--Contact Management
--Skype for Business Directory
√
×
--Local Directory
√
√
--Call History Management
√
√
--Headset Use
--Headset Mode
√
×
--Headset Prior
×
√
--Dual Headset
×
-- Calendar
√
--Always Online
√
--Log Upload
√
--E911 Location Tip
√

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm