Basic Call Feature
129
The LCD screen of phone A displays the call park orbit number.
To retrieve the parked call on phone A:
After things are processed, user on phone A presses the Retrieve soft key to retrieve the
parked call directly.
To retrieve the parked call on phone C:
User walks to an available conference room where the phone is designated as phone C.
The user uses phone C to dial the call park orbit number (appearing on phone A) to
retrieve the parked call.
The LCD screen of phone A will prompt that the parked call is retrieved by phone C
(user Lin Wei in the following figure).
Two-way voice path is established between phone C and B.
Note
If the call is hung up by the other party before parker retrieves the parked call, the
prompting message “Parked user ended call before being retrieved” will be displayed
on the LCD screen of parker.
The parker will receive a ring back if the parked call is not retrieved by anyone after
timeout expires. If the parker does not answer or reject the ring back, the call will be
terminated and will not get redirected to voice mail.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
