Yealink SIP-T42G User Manual

User Guide for the SIP-T42G IP Phone
146
To install the Yealink BToE Connector on your PC:
1. Unzip the downloaded file.
2. Double click the installation application Yealink BToE Connector.
A User Account Control dialog is displayed as below:
3. Ensure that the dialog lists YEALINK NETWORK TECHNOLOGY CO., LTD. as the
verified publisher and click Yes.
If the YEALINK NETWORK TECHNOLOGY CO., LTD. is not listed as the publisher,
click No and download the application again from the Yealink website.
The Yealink BToE Connector Setup Wizard is displayed as below:
4. Click Next to continue.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm