Yealink SIP-T42G User Manual

Troubleshooting
163
How to cancel auto-start for the Yealink BToE connector？
1. Right-click in the system tray.
2. Click Settings(P).
3. Uncheck Run automatically when starting Windows to cancel the auto-start
feature. As shown below:
How to uninstall the Yealink Better Together over Ethernet Connector?
You can uninstall the Yealink BToE Connector at any time. Note that after you uninstall
the Yealink BToE Connector, you can no longer use BToE. If you decide to start using the
BToE feature again, you must reinstall the Yealink BToE Connector and repeat the steps
for enabling and pairing your Yealink phone and PC.
To uninstall the Yealink BToE connector:
1. Click the Start button .
2. Click All Programs->Yealink BToE Connector->Uninstall.
The PC prompts” Are you sure to remove Yealink BToE Connector 3.0.0.10 and other
component completely?”:
3. Click Yes to uninstall the Yealink BToE connector.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm