Yealink SIP-T42G User Manual

Customizing Your Phone
43
To select a ring tone for the phone via phone user interface:
1. Press Menu->Settings->Basic Settings->Ring Tones->Common.
2. Press or to select the desired ring tone.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
A ring tone for the phone is configurable via web user interface at the path
Settings->Preference->Ring Type.
To upload a custom ring tone for the phone via web user interface:
1. Click on Settings->Preference.
2. In the Upload Ringtone field, Click Browse… to locate a ring tone file (the file
format must be .wav) from your local system.
3. Click Upload to upload the file.
Note
The phone directory list displays local directory and Skype for Business directory. You
can view contact information on the phone.
The priority of ring tone for an incoming call on the phone is as follows: Contact ring tone
(refer to Adding Local Contacts) ->Phone ring tone.
Both single custom ring tone file and total custom ring tone files must be within 100KB.
Uploading custom ring tones for your phone is configurable via web user interface only.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm