Yealink SIP-T42G User Manual

Customizing Your Phone
59
To place a call on the idle screen:
1. Press desired line key (indicating a favorite) when the phone is idle.
You can press the sixth line key to switch the page to select more contacts.
To place a call from the directory:
1. Press the Directory soft key.
2. Press or to select the desired group, and then press the Enter soft key.
3. Press or to highlight the desired contact.
4. Press the Call soft key.
- If a contact has only one number, the contact number will be dialed out
directly.
- If a contact has multiple numbers, you can press or to select the
desired number, and then press the Call soft key or press .
You can search the contacts on the pre-dialing screen or Skype for Business directory.
 On the pre-dialing screen, you can search for Skype for Business contacts, local
contacts and Microsoft Outlook contacts.
 In the Skype for Business directory, you can only search for Skype for Business
contacts.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm