EasyManuals Logo

Yealink SIP-T46U Administrator's Guide

Yealink SIP-T46U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #181 background imageLoading...
Page #181 background image
Audio Features
178
Topic
Smart Noise Block Configuration
Smart Noise Block Configuration
The following table lists the parameter you can use to configure smart noise block.
Parameter
voice.ans_nb.enable <y0000000000xx>.cfg
Description
It enables or disables the Smart Noise Block feature.
Note: It works only if “voice.tns.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
CP920
Web UI
Settings > Voice > Noise Proof > Smart Noise Block
Acoustic Shield
The acoustic shield feature is designed for background noise suppression when you are using the phone handset
or a connected headset.
It is particularly used in the open office environment, such as the call center, where background noise can impact
far-end audio quality.
It is only applicable to T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U phones.
Topic
Acoustic Shield Configuration
Acoustic Shield Configuration
The following table lists the parameter you can use to configure the acoustic shield.
Parameter
features.acoustic_shield.mode <y0000000000xx>.cfg
Description
It enables or disables the acoustic shield feature during the call.
Permitted
Values
0-Disabled
1-Enabled, you need to manually enable acoustic shield by pressing the Acous.S On soft key during
the call.
2-Auto, the acoustic shield is automatically enabled when the call is set up. You can press the
Acous.S Off soft key during the call to disable it.
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U
Web UI
Settings > Voice > Acoustic Shield > Acoustic Shield Mode
Parameter
features.acoustic_shield.level <y0000000000xx>.cfg
Description
It configures the noise suppression level for handsets and headsets.
The higher value represents the better noise suppression effect.
If it is set to 3, the phone automatically shields the noise out of 20 centimeters (7.9 inches) when you

Table of Contents

Other manuals for Yealink SIP-T46U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46U and is the answer not in the manual?

Yealink SIP-T46U Specifications

General IconGeneral
Handset typeWireless handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Display diagonal4.3 \
Display resolution480 x 272 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm

Related product manuals