EasyManuals Logo

Yealink SIP-T46U Administrator's Guide

Yealink SIP-T46U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #383 background imageLoading...
Page #383 background image
Call Features
380
Default
1
Supported
Devices
All phones except CP920
Auto Answer
Yealink phones support answering a SIP call or an IP address call automatically. Auto answer is configurable on a
per-line basis, while IP address call is not.
By default, the phones will not automatically answer the incoming call during a call or while dialing even if the auto
answer is enabled; and the incoming call will not be automatically answered after you end the current call or cancel
the dialing. You can configure how the phone answers the call automatically.
Topic
Auto Answer Configuration
Auto Answer Configuration
The following table lists the parameters you can use to configure the auto answer.
Parameter
account.X.auto_answer
[1]
<MAC>.cfg
Description
It enables or disables auto answer a SIP call.
Note: The phone cannot automatically answer the incoming call during a call or while dialing even if
the auto answer is enabled.
Permitted
Values
0-Disabled
1-Enabled, the phone can automatically answer an incoming call.
Default
0
Web UI
Account > Basic > Auto Answer
Phone UI
Color Screen Phones:
Menu > Features > Auto Answer > Line X > Auto Answer
Black-and-white Screen Phones:
Menu > Features > Auto Answer > Status
Parameter
account.X.auto_answer_mute_enable
[1]
<MAC>.cfg
Description
It enables or disables the auto answer mute feature.
Note: It works only if the values of parameters “account.X.auto_answer” and “features.allow_mute”
are set to 1 (Enabled). The value configured by this parameter takes precedence over that configured
by the parameter “features.mute.autoanswer_mute.enable”.
Permitted
Values
0-Disabled
1-Enabled, the phone will mute the microphone when an incoming call is automatically answered,
and then the other party cannot hear you.
Default
0
Web UI
Account > Basic > Auto Answer Mute
Phone UI
Menu > Features > Auto Answer > Account 1 > Auto Answer (On) > Auto Answer Mute
Parameter
features.ip_call.auto_answer.enable <y0000000000xx>.cfg
Description
It enables or disables the auto answer feature for IP call.

Table of Contents

Other manuals for Yealink SIP-T46U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46U and is the answer not in the manual?

Yealink SIP-T46U Specifications

General IconGeneral
Handset typeWireless handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Display diagonal4.3 \
Display resolution480 x 272 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm

Related product manuals