EasyManuals Logo

Yealink SIP-T46U Administrator's Guide

Yealink SIP-T46U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #239 background imageLoading...
Page #239 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
236
4.
Save the change and place this file to the provisioning server.
Softkey Layout Configuration
The following table lists the parameters you can use to configure the softkey layout.
Parameter
phone_setting.custom_softkey_enable <y0000000000xx>.cfg
Description
It enables or disables the custom soft keys layout feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Softkey Layout > Custom SoftKey
Parameter
phone_setting.custom_softkey.apply_to_states <y0000000000xx>.cfg
Description
It configures the desired call state to apply the custom softkey layout.
To configure the call states to apply the custom softkey layout:
Example:
phone_setting.custom_softkey.apply_to_states = DialingEmpty,DialTransEmpty
It means that DialingEmpty and DialTransEmpty call states will use the custom softkey layout.
To configure the call states not to apply the custom softkey layout:
Example:
phone_setting.custom_softkey.apply_to_states = -DialingEmpty,DialTransEmpty
It means that DialingEmpty and DialTransEmpty call states will not use the custom softkey layout.
Note: Multiple call states are separated by commas. It works only if “phone_setting.custom_softkey_
enable” is set to 1 (Enabled).
Permitted
Values
Blank (all call states will use the custom softkey layout)
Dialing, DialingEmpty, DialTrans, DialTransEmpty, DialConference, DialConferenceEmpty, Talk,
Hold, Held, CallIn, NewCallIn, BeTransferred, SemiAttendTrans, Conferenced, ConferencedHold,
ConferencedNewCallIn, Connecting, CallFailed, Paging, ListeningPaging, RingBack, SemiAt-
tendTransBack

Table of Contents

Other manuals for Yealink SIP-T46U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46U and is the answer not in the manual?

Yealink SIP-T46U Specifications

General IconGeneral
Handset typeWireless handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Display diagonal4.3 \
Display resolution480 x 272 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm

Related product manuals