EasyManuals Logo

Yealink SIP-T46U Administrator's Guide

Yealink SIP-T46U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #368 background imageLoading...
Page #368 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
365
Description
It enables or disables the digit map to be applied to the numbers dialed from the directory.
Note: It works only if “account.X.dialplan.digitmap.enable is set to 1 (Enabled). The value configured
by the parameter “account.X.dialplan.digitmap.apply_to.directory_dial takes precedence over that
configured by the parameter “dialplan.digitmap.apply_to.directory_dial”.
Permitted
Values
0-Disabled
1-Enabled
Default
Blank
Parameter
account.X.dialplan.digitmap.apply_to.history_dial
[1]
<MAC>.cfg
Description
It enables or disables the digit map to be applied to the numbers (received calls or missed calls)
dialed from call log lists.
Note: It works only if “account.X.dialplan.digitmap.enable is set to 1 (Enabled). The value configured
by the parameter “account.X.dialplan.digitmap.apply_to.history_dial” takes precedence over that con-
figured by this parameter.
Permitted
Values
0-Disabled
1-Enabled
Default
Blank
Parameter
account.X.dialplan.digitmap.apply_to.forward
[1]
<MAC>.cfg
Description
It enables or disables the digit map to be applied to the numbers that you want to forward to when per-
forming call forward.
Note: It works only if “account.X.dialplan.digitmap.enable is set to 1 (Enabled). The value configured
by the parameter “account.X.dialplan.digitmap.apply_to.forward” takes precedence over that con-
figured by the parameter “dialplan.digitmap.apply_to.forward”.
Permitted
Values
0-Disabled
1-Enabled, the incoming calls will be forwarded to the desired destination number according to the
string of the digit map.
Default
Blank
Parameter
account.X.dialplan.digitmap.apply_to.press_send
[1]
<MAC>.cfg
Description
It enables or disables the entered number to match the predefined string of the digit map after press-
ing a send key using off-hook dialing.
The off-hook dialing includes: pick up the handset, press the Speakerphone key or press the line key
when the phone is idle.
Note: It works only if “account.X.dialplan.digitmap.enable is set to 1 (Enabled). The value configured
by the parameter “account.X.dialplan.digitmap.apply_to.press_send takes precedence over that con-
figured by the parameter “dialplan.digitmap.apply_to.press_send”.
Permitted
Values
0-Disabled
1-Enabled
Default
Blank
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Emergency Dialplan and Enhanced 911
You can dial the emergency telephone number (emergency services number) at any time when the IP phone is
powered on and has been connected to the network. It is available even if your phone keypad is locked or no SIP
account is registered.

Table of Contents

Other manuals for Yealink SIP-T46U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46U and is the answer not in the manual?

Yealink SIP-T46U Specifications

General IconGeneral
Handset typeWireless handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Display diagonal4.3 \
Display resolution480 x 272 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm

Related product manuals