Yealink SIP-T46U Administrator's Guide

Advanced Features
430
features.call_park.park_retrieve_code = *11
After provisioning, the call park mode is set to Transfer. A Park soft key will display on the phone during an active
call and a Retrieve soft key will display on the Dialing screen. You can press the Park soft key to park a call to the
shared parking lot “*01”, or press the Retrieve soft key to retrieve the parked call from the shared parking lot “*01”
using the retrieve code “*11”.
Tip: You can set a line key as a Park key or a Retrieve key, specify a shared parking lot you want to park a call to for Park
key and specify a retrieve lot you want to retrieve a parked call from for Retrieve key. For more information, refer to Line
Keys.
Automatic Call Distribution (ACD)
ACD enables the use of phones in a call-center role by automatically distributing incoming calls to available users
or agents. You can enable users to use their phone in a call center agent/a supervisor role on a supported call
server.
The users can sign in and sign out of the ACD state as call center agent using soft keys. The server distributes calls
to the agent when the agent state is available, and stops distributing calls when the agent changes state to unavail-
able. The IP phone remains in the unavailable status until the agent manually changes the IP phone status. You
can configure how long the IP phone remains unavailable state and changes to available automatically on a sup-
ported call server.
Topics
ACD Key Configuration
ACD Configuration
Example: Setting ACD
ACD Key Configuration
You can configure a line key as ACD key to log into the ACD system. The ACD key on the IP phone indicates the
ACD state. ACD key is not available to T19(P) E2/CP920 phones.
The following shows configuration for an ACD key.
linekey.X.type = 42
linekey.X.label = ACD
After provisioning, an ACD key is available on the phone, and you can press the ACD key to log into the ACD sys-
tem.
ACD Configuration
The following table lists the parameters you can use to configure ACD.
Parameter
account.X.acd.enable
[1]
<MAC>.cfg
Description
It enables or disables the ACD feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.acd.available
[1]
<MAC>.cfg
Description
It enables or disables the phone to display the Available/Avail or Unavailable/Unavail soft key after
the phone logs into the ACD system.
Note: It works only if “account.X.acd.enable” is set to 1 (Enabled).

Yealink SIP-T46U Specifications

General

Handset type	Wireless handset
Product type	IP Phone
Product color	Gray
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Security algorithms	AES, HTTPS, SRTP, TLS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Front camera	-
AC adapter input voltage	100 - 240 V
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	AGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm