EasyManuals Logo

Yealink SIP-T46U Administrator's Guide

Yealink SIP-T46U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #500 background imageLoading...
Page #500 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
497
Supported: timer
Content-Length: 0
Topic
Session Timer Configuration
Session Timer Configuration
The following table lists the parameters you can use to configure the session timer.
Parameter
account.X.session_timer.enable
[1]
<MAC>.cfg
Description
It enables or disables the session timer.
Permitted
Values
0-Disabled
1-Enabled, the phone will send periodic UPDATE requests to refresh the session during a call.
Default
0
Web UI
Account > Advanced > Session Timer
Parameter
account.X.session_timer.expires
[1]
<MAC>.cfg
Description
It configures the interval (in seconds) for refreshing the SIP session during a call.
An UPDATE will be sent after 50% of its value has elapsed. For example, if it is set to 1800 (1800s),
the phone will refresh the session during a call every 900 seconds.
Note: It works only if “account.X.session_timer.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 90 to 7200
Default
1800
Web UI
Account > Advanced > Session Expires (90~7200s)
Parameter
account.X.session_timer.refresher
[1]
<MAC>.cfg
Description
It configures who refreshes the SIP session during a call.
Note: It works only if “account.X.session_timer.enable” is set to 1 (Enabled).
Permitted
Values
0-UAC
1-UAS
Default
0
Web UI
Account > Advanced > Session Refresher
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Reboot in Talking
Reboot in talking feature allows the phones to reboot during an active call when it receives a reboot Notify mes-
sage.
Topic
Reboot in Talking Configuration

Table of Contents

Other manuals for Yealink SIP-T46U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46U and is the answer not in the manual?

Yealink SIP-T46U Specifications

General IconGeneral
Handset typeWireless handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Display diagonal4.3 \
Display resolution480 x 272 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm

Related product manuals