Yealink SIP-T46U Administrator's Guide

Account Settings
296
Note: It is used in conjunction with the parameter "account.X.reg_failed_retry_max_time" to determine
how long to wait. The algorithm is defined in RFC 5626. We recommend that you set this value to an
integer between 10 to 120 if needed. If the values of this parameter and the parameter "accoun-
t.X.reg_failed_retry_max_time" are set to 0, the interval configured by "account.X.reg_fail_retry_inter-
val" will be used.
Permitted
Values
Integer greater than or equal to 0
Default
0
Parameter
account.X.reg_failed_retry_max_time
[1]
<MAC>.cfg
Description
It configures the maximum time to wait (in seconds) for the phone to retry to re-register after the
account registration fails.
Note: It is used in conjunction with the parameter "account.X.reg_failed_retry_min_time" to determine
how long to wait. The algorithm is defined in RFC 5626. We recommend that you set this value to an
integer between 60 to 1800 if needed. If the values of this parameter and the parameter "accoun-
t.X.reg_failed_retry_min_time" are set to 0, the interval configured by "account.X.reg_fail_retry_inter-
val" will be used.
Permitted
Values
Integer greater than or equal to 0
Default
60
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
[2]
Y is the server ID. Y=1-2.
PSTN Account Configuration
The following table lists the parameters you can use to register the PSTN account.
Parameter
pstn.account.X.enable
[1]
<MAC>.cfg
Description
It enables or disables the PSTN account X.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
CP920
Web UI
Account > Register > Line Active
Phone UI
Menu > Settings > Advanced Settings (default password: admin) > Accounts > Active Line
Parameter
pstn.account.X.label
[1]
<MAC>.cfg
Description
(Optional.) It configures the label to be displayed on the LCD screen for PSTN account X.
Permitted
Values
String within 99 characters
Default
Blank
Supported
Devices
CP920

Yealink SIP-T46U Specifications

General

Handset type	Wireless handset
Product type	IP Phone
Product color	Gray
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Security algorithms	AES, HTTPS, SRTP, TLS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Front camera	-
AC adapter input voltage	100 - 240 V
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	AGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm