Yealink SIP-T46U Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
258
Phone UI
Menu > Features > DSS Keys > Line Key X > Label
Parameter
linekey.X.extension
[1]
<y0000000000xx>.cfg
Descrip-
tion
For multicast paging:
It configures the channel of the multicast paging group.
For the BLF/BLF list/intercom feature:
It configures the pickup code.
Note: It is only applicable when “linekey.X.type” is set to 14, 16, 24 or 39.
Permitted
Values
For multicast paging:
0 to 31
For the BLF/BLF list/intercom feature:
String within 256 characters
Default
Blank
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Dsskey > Line Key > Line KeyX > Extension
Phone UI
Menu > Features > DSS Keys > Line Key X > Channel or
Menu > Features > DSS Keys > Line Key X > PIN/ID or
Menu > Features > DSS Keys > Line Key X > Extension
Parameter
linekey.X.xml_phonebook
[1]
<y0000000000xx>.cfg
Descrip-
tion
It specifies a specific group/phone book when multiple groups/phone books are configured on the
phone.
For example, both Remote Phone Book 1 “Sell” and Remote Phone Book 2 “Market” are configured on
the phone, you can configure “linekey.X.xml_phonebook = 0” to specify the Remote Phone Book 1
“Sell” for the specific line key. The user can press this line key to access the Remote Phone Book 1
“Sell”.
Note: It is only applicable when “linekey.X.type” is set to 22 or 45.
Permitted
Values
Integer from 0 to 48
Default
0
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Dsskey > Line Key > Line KeyX > Line
Parameter
features.flash_url_dsskey_led.enable <y0000000000xx>.cfg
Descrip-
tion
It enables or disables the LED indicator of the URL DSS key.
The LED indicator behavior depends on the response message from the server when you press the
URL DSS key on the phone.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920

Yealink SIP-T46U Specifications

General

Handset type	Wireless handset
Product type	IP Phone
Product color	Gray
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Security algorithms	AES, HTTPS, SRTP, TLS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Front camera	-
AC adapter input voltage	100 - 240 V
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	AGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm