Yealink SIP-T46U Administrator's Guide

Call Features
400
Default
0
Web UI
Features > Forward&DND > Forward > Always Forward > On/Off
Phone UI
Menu > Features > Call Forward > Always Forward > Always Forward
Parameter
forward.always.target <y0000000000xx>.cfg
Description
It configures the destination number of the always forward on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Always Forward > Target
Phone UI
Menu > Features > Call Forward > Always Forward > Forward to
Parameter
forward.always.on_code <y0000000000xx>.cfg
Description
It configures the always forward on code to activate the server-side always forward feature.
The phone will send the always forward on code and the pre-configured destination number (con-
figured by the parameter “forward.always.target”) to the server when you activate always forward fea-
ture on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Always Forward > On Code
Phone UI
Menu > Features > Call Forward > Always Forward > On Code
Parameter
forward.always.off_code <y0000000000xx>.cfg
Description
It configures the always forward off code to deactivate the server-side always forward feature.
The phone will send the always forward off code to the server when you deactivate always forward
feature on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Always Forward > Off Code
Phone UI
Menu > Features > Call Forward > Always Forward > Off Code
Parameter
forward.busy.enable <y0000000000xx>.cfg
Description
It triggers the busy forward feature to on or off on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
0-Off

Yealink SIP-T46U Specifications

General

Handset type	Wireless handset
Product type	IP Phone
Product color	Gray
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Security algorithms	AES, HTTPS, SRTP, TLS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Front camera	-
AC adapter input voltage	100 - 240 V
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	AGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm