EasyManuals Logo

Yealink SIP-T46U Administrator's Guide

Yealink SIP-T46U
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #535 background imageLoading...
Page #535 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
532
place a new call.
Default
1
Parameter
phone_setting.end_call_net_disconnect.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to end the call if the network is unavailable during the call.
Permitted
Values
0-Disabled
1-Enabled, the phone will end the call and go to the Idle screen after 5 seconds.
Default
0
Parameter
features.station_name.value <y0000000000xx>.cfg
Description
It configures station name to be displayed on the top-left corner of the LCD screen.
Note: The text displayed might be truncated if “features.station_name.scrolling_display” is set to 0
(Disabled). For T43U/T42G/T42S/T42U/T41P/T41S/T27G phones, the station name is displayed in the
middle bottom of the idle screen.
Permitted
Values
Blank (the label of the default account will be displayed)
String
Default
Blank
Parameter
features.station_name.scrolling_display <y0000000000xx>.cfg
Description
It enables or disables the phone to scroll the string display on the top-left corner of the LCD screen.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
phone_setting.incoming_call.reject.enable <y0000000000xx>.cfg
Description
It enables or disables the user to manually reject an incoming call on the phone.
Permitted
Values
0-Disabled, the Reject soft key disappears from the incoming call screen; pressing X/Mute key, tap
the on-hook key or using action URI to reject the call is not permitted.
1-Enabled
Default
1
Parameter
features.call_out_directory_by_off_hook.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically dial out the selected contact from Directory once you
press the off-hook key.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
CP920
Parameter
features.ok_key.talking.mode <y0000000000xx>.cfg

Table of Contents

Other manuals for Yealink SIP-T46U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46U and is the answer not in the manual?

Yealink SIP-T46U Specifications

General IconGeneral
Handset typeWireless handset
Product typeIP Phone
Product colorGray
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module supportYes
Ethernet LAN (RJ-45) ports2
Security algorithmsAES, HTTPS, SRTP, TLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Front camera-
AC adapter input voltage100 - 240 V
Display diagonal4.3 \
Display resolution480 x 272 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsAGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm

Related product manuals