Yealink T40G Configuring Guide

Customizing Your Phone
35
2. Enter the PIN in the Unlock PIN field.
3. Press the OK soft key to unlock the phone.
Note
You can also unlock the phone by entering the administrator password. When you enter the
administrator password to unlock the phone, the phone will turn to the Change PIN interface.
Dial-now
You can configure one or more dial-now rules. When the dialed number matches the dial-now
string, the number will be dialed out automatically. This is not applicable to W60B/W80B
phones.
Basic expression syntaxes you need to know:
Syntax
Description
.
The dot "." can be used as a placeholder or multiple placeholders for any
character. Example:
"12." would match "123", "1234", "12345", "12abc", etc.
x
An "x" can be used as a placeholder for any character. Example:
"12x" would match "121", "122", "123", "12a", etc.
-
Numeric ranges are allowed within the brackets: Digit “-” Digit. Example:
“[5-7]” would match the number”5”, ”6”or ”7”.
[]
The square brackets "[]" can be used as a placeholder for a single character
which matches any of a set of characters. Example:
"91[5-7]1234" would match "9151234", "9161234", "9171234".
()
The parentheses "( )" can be used to group together patterns, for instance, to
logically combine two or more patterns. Example:
"([1-9])([2-7])3" would match "923", "153", "773",etc.
$
The “$” followed by the sequence number of a parenthesis means the
characters placed in the parenthesis. The sequence number stands for the
corresponding parenthesis. Example:
A replace rule configuration, Prefix: "001(xxx)45(xx)", Replace: "9001$145$2".
When you dial out "0012354599" on your phone, the IP phone will replace the
number with "90012354599". “$1” means 3 digits in the first parenthesis, that
is, “235”. “$2” means 2 digits in the second parenthesis, that is, “99”.
Adding a Dial-now Rule
To add a dial-now rule via CommPortal phone configurator:
1. Click Line X->Dial Plan.
2. Enter the desired value (for example: 1xxx) in the Dial-Now Rule field.
3. Select the desired value from the Applicable to Line field (not applicable to CP920

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries