Yealink T40G Configuring Guide

Yealink IP Phones Configuring Guide
70
automatically. If your phone is unable to access the NTP server, configure the time and date
manually.
Display Issues
Why is the LCD screen blank?
Do one of the following:
 Ensure that the IP phone is properly plugged into a functional AC outlet.
 Ensure that the IP phone is plugged into a socket controlled by a switch that is on.
 If the IP phone is plugged into a power strip, try plugging it directly into a wall outlet.
 If your phone is PoE powered, ensure that you are using a PoE-compliant switch or hub.
Why does the IP phone display “No Service”?
The LCD screen prompts “No Service” message when there is no available SIP account on the IP
phone.
 Ensure that an account is actively registered on the IP phone at the path
Menu->Status->More->Accounts.
Phone Book Issues
What is the difference between a remote phone book and a
local directory?
A remote phone book is placed on a server, while a local phone book is placed on the IP phone
flash. A remote phone book can be used by everyone that can access the server, while a local
phone book can only be used by a specific phone. A remote phone book is always used as a
central phone book for a company; each employee can load it to obtain the real-time data from
the same server.
Audio Issues
How to increase or decrease the volume?
Press the volume key to increase or decrease the ringer volume when the IP phone is idle or

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries