Yealink T40G Configuring Guide

Customizing Your Phone
37
4. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to Downloading Configuration
Files on page 39.
Configuring Live Dialpad
Live dialpad allows IP phones to automatically dial out the entered phone number without
pressing the send key after a designated period of time. This is not applicable to W60B/W80B
phones.
To enable the live dialpad via CommPortal phone configurator:
1. Click Features->Dial Plan.
2. Mark the Enabled radio box of the Live Dialpad Enabled field.
3. Select the delay time from the Automatically Outgoing Delay field.
4. Click Save changes to accept the change.
5. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to Downloading Configuration Files
on page 39.

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries