Yealink IP Phones Configuring Guide
50
Configuring a Retrieve Parked Call Key
You can retrieve the parked call by pressing a retrieve parked call key or dialing the retrieve
access code followed by the orbit number (for example: *302100).
To configure a retrieve parked call key via the CommPortal phone configurator:
1. Click Programmable Keys - Line Key->Key X.
2. Select Retrieve Parked Call from the Soft key action field.
3. Select the desired line to apply this feature from the Line field.
4. Enter the access code for retrieving parked call in the Access Code field.
5. Select the desired orbit where you want to retrieve the parked call from the Park Orbit
field.
6. Enter the string that will appear on the LCD screen in the Label field.
7. Click Save changes to accept the change.
8. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to Downloading Configuration
Files on page 39.
Parking a Call
To park a call on the phone:
1. During a call, do one of the following:
If you press the park call key:
When the call is parked successfully, you will hear a voice prompt informing you of the
extension where the call is parked.
Press the Transfer soft key to complete the park.
If you press the enhanced park call key:
The call will be parked to the orbit you designated in the Park Orbit field.
To Next Page
Loading...
Need help?
General
