Yealink T57W

MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
10
1 BEFORE YOU BEGIN
This guide provides information that you need to quickly use your new Hosted PBX (HPBX) phone.
First, verify with your system administrator that the IP network is ready for phone configuration.
Also, be sure to read the Quick Start Guide, which can be found in your phone package, before
you set up and use the phone. As you read this guide, keep in mind that some features are only
configurable by your system administrator or determined by your phone environment. As a
result, some features may not be enabled or may be operated differently on your phone.
Additionally, the examples and graphics in this guide may not directly reflect what is displayed
or available on your phone screen.
Note: This guide primarily uses the T54W phones as an example.
This user guide contains information for the following Yealink Hosted PBX products:
• T54W prime HPBX phones
• T57W prime HPBX phones
1.1 Yealink Documentation
You can obtain additional information on the phones from Yealink Support:
•
Prime Business Phones T54W
•
Prime Business Phones T57W
The following types of related documents are available on each support page on Yealink support
page:
•
Release Notes, which details matters like “ bug” fixes and feature enhancements when an
update is released.
•
Quick Start Guide, which describes how to assemble your phone and configure the basic
phone features.
2 GETTING STARTED
Before you use your phone, take some time to get familiar with its features and user interface.
The terms “the phone” and ”your phone” refer to any of the IP phones. Unless specifically noted
in this guide, all phone models are operated in similar ways.
2.1 Hardware Overview
Understanding the phone hardware helps you to easily use the phone’s features.