Yealink T57W

MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
84
Figure 31. Adjusting Transparency
6.3 Screen Saver
The screen saver starts automatically when your phone has been idle for the preset waiting time.
You can stop the screen saver by pressing any key.
6.3.1.1 Changing the Waiting Time for Screen
You can set the waiting time after no activity before displaying the screen saver.
Procedure
1. Navigate to Menu > Basic > Display > Screensaver.
2. Select the desired waiting time from the Wait Time field.
3. Select Save.
6.3.2 Disabling time & Date and Status Icons Display
You can disable your phone to display time, date, and status icons on the screen saver. The Time
& Date and status icons display on the screen saver, as shown below:
Figure 32. Time & Date and Static Icons Display
Note: You cannot configure Time & Date and status icons display if your system administrator
has set your phone to display customer information on the screen saver.
Procedure
1. Navigate to Menu > Basic > Display > Screensaver.
2. Select Disabled or Off from the Display Clock field.
3. Select Save.