Yealink T57W

MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
72
headset modes. If your phone is set to answer intercom calls with your microphone muted, you
need to press the Mute key to unmute your microphone before responding to the call.
You can configure the following behaviors when receiving an intercom call.
Intercom Allow
Intercom Allow feature allows the phone to automatically answer an incoming intercom call. If
you disable this feature, the phone will handle an incoming intercom call like a normal incoming
call.
Note: Your system administrator can set a period of delay time before the phone automatically
answers intercom calls.
Intercom Mute
Intercom Mute feature allows the phone to mute the microphone when incoming intercom calls
are answered automatically.
Intercom Tone
Intercom Tone feature allows the phone to play a warning tone before answering an intercom
call automatically.
Intercom Barge
Intercom Barge allows the phone to automatically answer an incoming intercom call while an
active call is in progress. The active call will be placed on hold. If you disable this feature, the
phone will handle an incoming intercom call like a normal incoming call while there is already
an active call on the phone.
Note: To enable the phone to receive a new incoming call when it already has an active call, make
sure that the call waiting feature is enabled on the phone in advance.
Procedure
1. Navigate to Menu > Features > Intercom.
2. Make the desired changes.
3. Select Save.
4.9 Voice Mail
Voice mail feature allows you to leave voice mails for someone or listen to your voice mail
messages on your IP phones.
Note: This feature is set up on the server-side and not all servers support this feature.
4.9.1 Leaving Voice Mails
You can leave a voice mail to someone who is busy or unable to answer the call.