MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
42
2. Select the desired transfer mode.
3.15
Conference Calls
The phone supports creating local conference and network conference. During the conference,
follow these tips:
•
Use the handset or a headset if you're in an open environment.
•
Mute your microphone when you are not speaking, especially in noisy environments.
•
Avoid tapping or rustling papers near the microphone.
•
Speak in your normal voice without shouting.
3.15.1 Local Conference
You can initiate a conference call with up to ten numbers including yours ten-way with your
contacts on the phone.
Note: Check with your system administrator to find out if the local conference is enabled on your
phone.
3.15.1.1
Setting up a Local Conference Call
Procedure
1. Place a call to the first party.
2. Select Conference to place a new call.
The active call is placed on hold.
3. Dial the second party’s number.
• You can also select the desired contact from the search list or select a contact from the
placed call list or Directory before you enter the number.
4. When the second part answers the call, select Conference to add the second party to the
conference.
5. Repeat the above steps to add more parties to the conference.
3.15.1.2
Merge Two Calls into a Conference
You can invite a held call into a conference call with the active call.
Procedure
1.
Place two calls on the phone.
2.
Select the desired call for a conference and ensure that the call is active.
3.
Select Conference.
4.
Highlight the desired hold call and select
Send.