Yealink VC120 - Ending Calls

Using the VC120 Video Conferencing System
105
3. Press (Back soft key) to return.
You can also press the DND soft key on the video conferencing phone to enable or disable the
DND feature during an active all.
DND during an active all feature is configurable via web user interface at the path
Home->DND.
Ending Calls
During a two-way call, do one of the following to end the call.
- Press on the remote control.
- Press or the End Call soft key on the video conferencing phone.
- Click Hang Up All button on the web user interface.
The interface prompts “Hang up?”
Click Confirm to end the call.
During a multi-way call, do one of the following to end the call.
- Press on the remote control.
The display device prompts “End all active calls?”
Select Yes, and then press .
- Press or the End Call soft key on the video conferencing phone.
The LCD screen of the video conferencing phone prompts “End All Active Calls?”
Press or the Yes sort key to end all calls.
- Click Hang Up All button on the web user interface.