User Guide for the VC120 Video Conferencing System
80
Far-end Camera Control
Local video is displayed on the display device of the far site during a call. For the best view, you
can enable the Far Control of Camera feature to allow the far site to control the focus and
angle of the local camera. You can also specify whether the far site is allowed to store and use
the local camera presets.
You can configure the far-end camera control feature via the remote control or web user
interface.
Far-end camera control features you need to know:
Allows the far-end to control the local camera.
Far Set of Camera Presets
Allows the far-end to create presets for the local camera
Far Move to Camera
Presets
Allows the far-end to point local camera at pre-defined
locations.
To configure Far-end Camera Control via the remote control:
1. Press (Menu soft key) to enter main menu.
2. Press or to select the Video & Audio menu.
3. Press or to scroll to Far-end Camera Control, and then press .
4. Press or to scroll to Far Control of Camera, and then press to enable or
disable this feature.
5. Press or to scroll to Far Set of Camera Presets, and then press to enable or
disable this feature.
To Next Page
Loading...
