Customizing the VC120 Video Conferencing System
57
Hiding Icons in a Call
During a call, the display device displays some icons to indicate the call status. You can hide
these icons as needed to achieve the best video effects. Hiding icons in a call feature is
configurable via web user interface only.
To hide icons in a call via web user interface:
1. Click on Setting->General.
2. Select the desired values from the pull-down lists of Time Icon, Mute Icon, Camera Icon,
Recording Icon, Sitename Icon, Hold Icon, Encrypt Icon, OutPut Mute Icon, and
SecondScreen Icon.
- If you select Disabled, the system displays corresponding icons during a call.
- If you select Hide with UI, the system displays corresponding icons during a call, but
the icons will disappear when the operation menu is hidden automatically.
- If you select Enabled, the system does not display corresponding icons during a call.
3. Click Confirm to accept the change.
USB Configuration
If you have high requirement for data security, you can disable the USB feature. If you disable
the USB feature, you cannot view the videos and screenshots stored in the USB flash driver via
the remote control, and cannot record video or capture screenshots too.
To configure USB configuration via web user interface:
1. Click on Setting->Video & Audio.
To Next Page
Loading...
