Yealink VC120 - Using the VC120 Video Conferencing System; Account Polling

Using the VC120 Video Conferencing System
83
Using the VC120 Video Conferencing System
The VC120 video conferencing system can be used to place calls, answer calls, or conduct a
conference cal. You can switch layout, record videos or capture screenshots during a call.
This chapter provides basic operating instructions for the VC120 video conferencing system.
Topics include:
 Account Polling
 8-way MCU
 Placing Calls
 Answering or Rejecting Calls
 Ending Calls
 Call Management
If you require additional information or assistance with your new phone, contact your system
administrator.
Account Polling
When you dial account numbers of other system, account polling feature enables your system
to use different call types according to this priority: Cloud platform>H.323 account>SIP account.
If you cannot call other systems using all your registered accounts, then this call fails.
Account polling is disabled by default. When you register multiple accounts (2 or more) for your
system, you can enable account polling feature. You can configure account polling feature via
web user interface only.
To configure account polling via web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of Account Polling.
- If you select Disabled, the system can only call other systems using the call type with
the highest priority.