Yealink VC120 - System Component Instructions

Overview
5
VCM30 Package
 VCM30 Video Conferencing Microphone Array
 Ethernet Cable (7.5m)
Locate the Audio In port of on the 120 Codec, and connect it to the Audio Out port of the
VCM30 with the 7.5m Ethernet cable. VCM30 video conferencing microphone array can work as
the audio input device for the VC120 video conferencing system. For more information, refer to
Audio Input Device on page 78.
Note
System Component Instructions
Before installing and using the VC120 video conferencing system, you need to be familiar with
the following system components:
 VC120 Codec
 VCC18/VCC20 HD Camera
 Video Conferencing Phone
 CPE80 Expansion Microphone
 VCM30 Video Conferencing Microphone Array
 VCR10 Remote Control
VC120 Codec
VC120 Codec compresses outgoing video and audio data, transmits this information to the far
end, and decompresses incoming data. It supports 16:9 and 4:3 aspect ratios. It can be
compatible with different audio output devices, and can adapt to the display devices
Check the list before installation. If you find anything missing, contact your system administrator.