Using the VC120 Video Conferencing System
109
To change video input during a call:
1. Press .
The display device shows Camera, Camera and PC and PC input sources.
- If you select PC, the remote video image is shown in full screen.
- If you select Camera and PC or PC, the PC presentation is shown in big size, and
other video images along the right side of the screen are shown in small size.
- If you select Camera, the remote video image is shown in full screen.
2. Press or to select the desired input source, and then press .
The display device shows the selected source.
Video input is configurable via web user interface at the path Home->Input.
Presentation
The system supports sharing video and documents on a PC while simultaneously displaying the
main video. We recommend using dual display devices for sharing contents. During a call, if a
PC is connected to the VC120 Codec, the system will start a presentation automatically. Both
local and remote display devices will share contents.
You can also start/stop presentation during a call via the remote control or video conferencing
phone (ensure a PC is connected to the VC120 Codec). If you disconnect the PC, the
presentation will end automatically.
Only one presentation can be shared at a time. A presentation started later will replace the
previous presentation.
To Next Page
Loading...
