Yealink VC120 - Page 137

Using the VC120 Video Conferencing System
123
Specifying the Content on the Second Screen
To specify the content to be displayed on the secondary display device via the remote
control:
1. Press (More soft key) during an active call.
2. Select Focus (Display2), and then press .
3. Press or to select the desired content, and then press .
The secondary display device displays the selected content. The icon is displayed on
the focus content.
After reassigning the display content on the secondary display device, the presentation will
automatically be displayed on the primary display device.
After reassigning the content displayed on the secondary display device, the presentation
will automatically be displayed on the primary display device.