Using Cloud Platform
135
ID**conference password to join the conference.
Obtain the conference information from your email address or other conference
participants.
Note
Permanent Virtual Meeting Room
The administrator can configure the permanent VMR via the Yealink Meeting Server. You can
join the permanent VMR at any time, without a reservation.
You can enter a permanent VMR in following ways:
Dialing from the Yealink Enterprise Directory
Dialing to enter a permanent VMR
Join a Permanent VMR from the Yealink Enterprise Directory
The administrator can determine whether synchronize the permanent VMR to the VC120. It is
enabled by default.
To place a call to a permanent VMR via the remote control:
1. Press (Call soft key).
2. Press or to select the Directory menu.
3. Select Enterprise directory from the pull-down list of the All Contacts.
4. Select the desired permanent VMR.
5. Press or .
If the system fails to join the scheduled conference, please refer to General Issues on page 152.
To Next Page
Loading...
