Yealink VC120 - Page 45

Getting Started
31
8. Press (Next soft key) to continue or press (Previous soft key) to return to the
previous screen.
The display device shows firewall port mapping information.
9. Press (Next soft key) to continue or press (Previous soft key) to return to the
previous screen.
10. Configure network settings.
The phone will try to contact a DHCP server in your network to obtain network parameters
by default. If you uncheck the DHCP checkbox, you will need to configure IPv4 or IPv6
network manually.
11. Press (Next soft key) to continue or press (Previous soft key) to return to the