IP Video Phone Getting Started
When you have finished the Network and Account Setting configuration, the Register
Status Icons will be shown in the idle screen:
Register successfully
Register failed
Note:
Should the IP PBX (SIP registrar) require an authentication, you will be prompted to
enter the correct password. Make sure you are using the appropriate input method or
enter the password via the web user interface.
Configuring via keypad
Network Settings: Click Settings->Advanced ->WAN Option/LAN Option/BandWidth
Option to enter the internet relating configuration page.
Account Settings: Click Settings->Advanced->Account to configure the account
settings.
You can refer to the above “Configuring via Web Page” for the parameter details.
- 6 -
To Next Page
Loading...
