Yealink VP-2009

IP Video Phone Using the Advanced Phone Functions
phone interface.
The default administrator password is admin. Meanwhile the user name for web
interface access is admin.
To change the administrator password via phone interface:
1) In “Settings” page, click【Basic】->【Security】option to enter.
2) Click the【Admin Pwd】to enter the configuration page;
3) Press Up/Down buttons, choose and fill in the 【Old Password】,【New Password】
and【Re-enter】blacks.
4) Press <F1> to save the change, or press <F4> to cancel the operation and return
to the “Security page”.
To change the administrator password via web interface:
Enter Security page, choose user type in the pull-down menu of User Type option, enter
the old password, new password and confirm password, then click Confirm button to
save the changes, or Cancel button to cancel the operation.
Reset to Factory
You should reset the phone only in this case: the phone configuration was changed and
the phone is not functioning anymore. To maintain the configuration of the phone, you
need your system administrator or service provider’s advice.
Reset to factory via phone interface:
1) Click【Settings】->【Advanced】option, enter the password to enter. The default
password is admin.
2) In “Advanced” page, click【Factory】option to enter the configuration page.
3) It will pop up a warning frame asking whether confirm to reset to factory settings.
- 52 -