Yealink VP-2009

IP Video Phone Using the Advanced Phone Functions
mode, the DHCP server can not work.
Starting IP Indicate the range of the IP address
End IP Indicate the range of the IP address
To configure PC Port settings via phone interface:
1) Press Settings->Advanced.
2) Enter the password required, click LAN option to enter.
3) If you choose Bridge, it will return to the previous menu.
4) If you choose Router, you will be prompted to enter the IP Address, Subnet Mask,
DHCP Server Disable/Enable.
5) Press Save softkey to save the changes, or Exit softkey to return to the previous
menu.
To configure PC Port settings via web interface:
Choose Network->PC Port(LAN) to do the relating configuration, you can set the
starting and end IP address only via web interface. You can consult your system
administrator for more information.
BandWidth
Configure bandwidth via phone interface:
1) Click【Settings】->【Advanced】option, enter the password to enter. The default
password is admin.
2) In “Advanced” page, click【Bandwidth】option to enter the configuration page;
- 50 -