Yealink VP-2009

IP Video Phone Customizing Your Phone
2) Press Up/Down button to choose the【Time Zone】option;
3) Press <OK> button to pop up the pull-down menu, press Up/Down navigation key
to choose the correct Time Zone; Press <OK> button to save the changes; users
can also press Left/Right navigation key to set this option directly;
Note:
You can follow the above steps to set Time Format.
4) Press Up/Down to choose the【NTP Mode】, then choose and fill in the【Time Server】
option.
5) You can also set the date and time manually. Press the Up/Down navigation key to
choose the【Manual Mode】option, then choose and fill in the【Date】and【Time】
option.
6) Press Save softkey to save the changes, and get back to “Settings” page.
To change Time and Date via web interface:
Choose Phone->Preference to do the relating changes. You can also change the NTP
Interval which specifies the time frequency that the phone refreshes the time
automatically. Please refer to the instruction above for the parameters’ detail.
Note:
By default the time zone is +8 China, Philippines, Malaysia, Daylight Saving Time is
disabled.
Security
Configure Security via phone interface:
1) Click 【Settings】->【Basic】->【Security】->【Admin Pwd】option to enter the
configuration page.
- 20 -