IP Video Phone Using the Advanced Phone Functions
To update the firmware when powering on:
Plug in the adapter while pressing the <F2> button to update to the latest firmware on
the server.
To update the firmware manually via web interface:
1) Choose Upgrade->Browse, select the firmware file in your local computer.
2) Click Upgrade button to update the new firmware.
3) Please do not power off during the updating.
Note:
1. Any power interruption during the following process will most likely lead to a flash
memory error. As a result the system cannot boot up anymore. The procedure can
only be conducted in Administrator Mode.
2. If the updating is failed, you can re-plug the power adaptor, and press the <F2>
key for 3 seconds, the IP phone will enter the account configuration interface. Users
can reconfigure the IP phone account information here, then press the OK button to
save the changes.
Reboot
To reboot your device via phone interface:
1) Click【Settings】->【Advanced】option, enter the password to enter. The default
password is admin.
2) In “Advanced” page, click【Reboot】option to enter configuration page.
3) It will pop up a warning frame asking you whether to reboot your device. Click “OK”
to confirm the changes, click “Esc” to cancel.
- 54 -
To Next Page
Loading...
