IP Video Phone Using the Advanced Phone Functions
3) Click 【 Bandwidth 】 option to pop up the pull-down menu, choose the proper
bandwidth, and press <OK> to confirm the change.
4) Follow the above steps to set the【Frame Rate】option.
5) Press <F1> to save the changes and get back to the “Advanced” page.
Configure Bandwidth and Frame Rate via web interface:
1) Choose Account->Video.
2) Choose Bandwidth and Frame Rate option to do the relating settings.
Maintenance Tasks
Administrator Mode
The phone allows two modes to configure the phone:
z User Mode
z Administrator Mode
Administrator mode grants unlimited access to the phone configuration on both web
and phone interface. User Mode can not set the parameters such as: Accounts, Network,
Reset to Factory and some other phone settings by the Phone interface.
Administrator/User Password
Administrator mode grants unlimited access to the phone configuration on both web
and phone user interface. The administrator/user password is used to access:
z Web interface along with user name.
z The advance settings such as Network, Account, Reset to Factory Settings via
- 51 -
To Next Page
Loading...
