Yealink VP-2009

IP Video Phone Using the Advanced Phone Functions
4) If you choose【DHCP】type, Press <F1> to save the changes;
5) If you choose【PPPoE】type, press Up/Down button to configure the corresponding
“User Name” and “Password”. Then press <F1> to save the changes.
6) If you choose【Static IP】, press Up/Down button to choose and configure “IP
Address”, “Mask”, “Gateway”, “DNS1” and “DNS2”, then press <F1> to save the
changes.
Configure WAN information via web interface:
1) Choose Network.
2) Choose Internet Port (WAN) option to do the relating settings.
LAN
The following table lists the instructions of the field about the Network PC Port Setting.
Field Name Description
As Bridge If you select the Bridge mode, then the two Fast Ethernet ports
will be transparent.
As Router If you select the Router mode, the SIP phone will work as a
router
IP address User could configure the PC port IP address.
Subnet Mask A subnet mask allows you to identify which part of an IP address
is reserved for the network, and which part is available for host
use.
DHCP Server If you set the DHCP server on, the device connected to the PC
port will get the IP address automatically between the start IP
address and the end IP address. But if you select the bridge
- 49 -