Yealink VP-2009

IP Video Phone Using the Advanced Phone Functions
Advanced Settings
The following table lists the instruction of the field about the advanced Account Setting.
Field Name Description
UDP Keep-alive
Message
Defines whether to active the phone UDP Keep-alive
mechanism. The default is Enabled.
UDP Keep-alive
Interval
This parameter specifies how often the phone will send a packet
to the SIP server. Default is 30 seconds.
Login Expire This parameter specifies the time frequency that phone
refreshes its registration. The default interval is 3600 seconds.
Local SIP Port Local SIP port. The default value is 9060.
RPort The parameter allows you configuring the proxy to send
responses back to a particular address and port. The default is
disabled.
SIP Session Timer This document defines an extension to the Session Initiation
Protocol (SIP). This extension allows for a periodic refresh of
SIP sessions through a re-INVITE or UPDATE request. The
refresh allows both user agents and proxies to determine if the
SIP session is still active.
DTMF Type Select the DTMF type.
You can only configure these settings via web interface.
3) Choose Account.
4) Choose Advanced to do the relating settings.
You can consult your system administrator for more information.
Network Setting
WAN
Configure WAN information via phone interface:
1) Click【Settings】->【Advanced】option, enter the password to enter. The default
password is admin.
2) In “Advanced” page, click【WAN】option to enter configuration page;
3) Press <OK> to pop up the pull-down menu, press Up/Down button to choose the
proper IP assignment type, press <OK> to save the changes.
- 48 -