Yealink VP-2009

IP Video Phone Using the Advanced Phone Functions
Click “OK” to confirm the changes, or “Esc” to cancel.
To reset to factory via web interface:
1) Choose Upgrade.
2) Click Reset to Factory button.
Note:
If you confirm all current setting changes including contact list, call history, account
settings, etc will be lost, you need to export the configuration first if you still want to
import the old configurations after reset. Or your phone must be configured a new
manually unless mass provisioning is used!
Firmware Update
The phone is delivered with pre-installed firmware which allows operating your phone
flawlessly. If you require updating the phone’s firmware please contact your system
administrator. You can only update the firmware via web interface.
VP-2009 supports 3 upgrade methods: manual update, Boot Update and Time Update.
Configure Upgrade via phone interface:
1) Click【Settings】->【Advanced】option, enter the password to enter. The default
password is admin.
2) In “Advanced” page, click【Upgrade】option to enter configuration page;
3) Press Up/Down button to choose a proper option, press <OK> to confirm the
change.
4) Press Up/Down button to choose and fill in “Update Server”.
5) Press <F1> to save the changes, press <F2> to update immediately.
- 53 -