IP Video Phone Using the Advanced Phone Functions
System Log Export
If there are any errors happened in your phone, you can export the system log and send
to your system administrator for diagnosis.
To Export the old configuration file via web interface:
1) Choose Upgrade, click Export syslog button to export the file to your local
computer.
2) It will take a few minutes to reset, please do not power off during resetting, or it will
cause flash memory error.
Other Settings
TS Calibrate
To calibrate the touch screen via phone interface:
1) Click【Settings】->【Advanced】option, enter the password to enter. The default
password is admin.
2) In “Advanced” page, click【TS Calibrate】option to enter configuration page;
3) Touch the five white cross appears on the black screen in sequence to calibrate the
touch screen.
4) It will pop up a warning frame asking you whether to save the calibration
parameters. Click <OK> to save the changes and return to the “Advanced” page, or
【Esc】to cancel.
- 55 -
To Next Page
Loading...
