IP Video Phone Getting Started
Note:
The telephone line cord is only available for the model VP-2009T with PSTN
connectivity.
Please unpack the product package with caution; inspect the items closely. If you find
any damaged item, please contact your IP Video phone reseller immediately. Also,
please keep the box and packing material for future use in the event of future
shipments.
Assembling the Phone
This section introduce how to assemble the phone.
1) Connect the IP video phone shown as below:
Note:
Headset is not included in the packing list. Should be purchased separately.
2) Connect Network and Power
There are two ways for network and power source connections. You can connect the
phone to the AC Power directly using the power adapter or to a PoE compliant switch or
hub. Your system administrator will advise you on which one to use.
- 3 -
To Next Page
Loading...
